American Time Wired Tone Generator Manuel d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} American Time Wired Tone Generator. American Time Wired Tone Generator 11 pages. Wired tone generator

Imprimer la page
Operation
The audio input and output can be added to any amplifier, intercom or paging system. The unit can
send one of the preselected tones or background music supplied by another music source.
The tone generator has eight distinct tones which can be triggered by closing a wired connection
between the C (Tone Selection Common) and the proper T1, T2, T3 and T4 combination located on
the terminal block. The Tone Selection Table (see below) lists which T1 through T4 combinations are
needed for each desired tone.
The Power, Audio Input and Audio Outputs are also connected and labeled on the terminal block.
Multi-Tone Generator
GAIN
(500 mA max)
1-800-328-8996
6
T1
T2
T3
T4
COM
SPKR
8 OHM
SPKR
AUDIO IN
P/A
AUDIO OUT
AMP
COM
(+)
12VDC
PWR
MOD
(-)
www.atsclock.com
Apply a contact closure from T1, T2, T3 or T4 to C from
a time switch, master clock or push button control.
Apply jumpers to the T1, T2, T3 or T4 terminals as
required for additional tones. See the Tone Selection
Table below.
Speaker output (optional)
Connect the background audio from existing system to
the Audio In. Connect the Audio Out to the input of the
existing system.
Multi Tone Generator
© American Time