Air Creation RACER 503 S Manuel d'instruction et d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et d'entretien pour {nom_de_la_catégorie} Air Creation RACER 503 S. Air Creation RACER 503 S 18 pages.

Imprimer la page

1. Technical Specifications

Every 10 hours of flight time :

• Change both spark plugs.

• Check trike, engine and propeller nuts. Pay particular attention to front and tail undercarriage

wheel locknuts. After removal, tighten and secure using "LOCTITE FREINBLOC".

• Check the exhaust, the silent blocks and the manifold springs.

• Check the air filter and filter/carburetor assembly bolts.

• Check oil level in the reduction gear box, topping up when necessary.

• Check fan belt tension.

• Check the fuel filter for sludge.

• After the first 10 hours of operation, change the oil in the reduction gear box and tighten

cylinder head bolts and check setting of ignition.

• Check the propeller.

Every 50 hours of flight time :

• Change the engine and exhaust mounting silent blocks.

• Change the 2 front wheel shock absorbers.

• Change the starter cord.

• Check the monopole where the engine is mounted and around the swivel joint for hairline

cracks or play.

• Check seams on welded assemblies and mounting holes for play (engine support, front forks,

lower beam, hooking frame point, monopole swivel joint etc.).

• Check engine ignition and contact points.

• Grease throttle cables and check cable stops.

• Clean the air filter.

• Check propeller balance (see III b)

Instruction and Maintenance HandBook RACER

AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France

Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr

EDITION : JUNE 2005

PAGE : 11