Dongguan Winlex Electronics WL-A106 Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dongguan Winlex Electronics WL-A106. Dongguan Winlex Electronics WL-A106 7 pages. Hye bluetooth acoustic equipment
Imprimer la pagecharger and then re-insert it.
3 After the headset is fully-charged, the red indicator light will become blue. In this case, please
unplug the travel charger from the power socket and headset.
• Repeated charging and discharging of the acoustic equipment may lead to the declined battery
performance with the time going on.
• During the charging, please be sure not to make or receive phone calls. Please always receive
calls after the charger is removed from the acoustic equipment.
When the battery capacity of acoustic equipment is not adequate, the indicator light of headset will
be flashing red, and you can hear the alarm or "The battery capacity of acoustic equipment is low".
If the acoustic equipment is shut down during the time when you make phone calls, these calls
will be automatically transferred to your mobile phone.
VI. While Using the Acoustic Equipment
In this section, you will be taught how to turn on and shutdown the acoustic equipment, create
pairing and connection between acoustic equipment and mobile phone, and get acquainted with
the use methods for various functions.
• The available functions and features may be varied from mobile phone models.
• Some devices, especially those untested or recognized by the Bluetooth Special Interest Group
(SIG), may be incompatible with the headset.
To ensure the acquisition of the best acoustic equipment performance, it is required to
•Keep the distance between the acoustic equipment and the device as close as possible, so as to
prevent your body or other objects from blocking the signal channel.
• The blocking of acoustic equipment or device may affect its performance, thus, please try to
reduce the blocking.
. Bluetooth pairing
1
{1} Long press on MFB
alternate flashing of red/blue lights;
{2} Bluetooth will search the pairing state (alternate flashing of red/blue lights)
{3}If the paired devices have been found, the name will be WL-A106
{4} After the connection is successful, you will hear the default (the beep sound of
prompt tone) and the blue light flashes, while the red light is out;
.
2
Receiving/ Hanging up calls
{1} Receiving call: When the bell rings, short press MFB key for 1 second;
{2} Hanging up calls: At the time of calls, short press MFB key for 1 second;
{3} Reject calls: When the bell rings, press and hold MFB key for 2 seconds;
.
3
Play music
key for 3 seconds, and the red/blue light will be lit, and