Donner & Blitzen M42482 Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Donner & Blitzen M42482. Donner & Blitzen M42482 3 pages. 7.5' westchester slim cashmere pine

Imprimer la page

CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER

SOURCE BEFORE ATTEMPTING EITHER FUSE OR BULB

REPLACEMENT.

REPLACEMENT PARTS LIST

Part

Description

Part #

Fuses

W14T0324-F

Bulbs

W14T0324-B

FUSE REPLACEMENT

This product comes with an overload protection (fuse). A blown fuse indicates an overload or short

circuit. If a fuse blows, unplug tree from wall outlet. Replace the fuse as per the fuse replacement

instructions below (follow product marking for proper fuse rating). If the fuse blows, a short circuit may

be present and the product should be reviewed to determine the cause.

Power cord fuse replacement (1 replaceable 3-amp 125V fuse is located in plastic bag)

1. Grasp plug and remove from its power source (Illustration.1).

2. Locate blown fuse(s) by sliding access cover on top of plug towards prongs.

3. Remove blown fuse by turning the plug over. A fuse should fall into your hand

(Gentle tapping may be required).

4. Replace blown fuse with spare replacement fuse. Close fuse cover by sliding

fuse access cover towards the cord.

BULB REPLACEMENT:

1. Grasp plug and remove from its power source

2. Pull bulb AND plastic base straight out of socket. Do not twist bulbs.

3. Replace burned bulb with 2.5 volt 0.425 watt bulb ONLY. (Additional bulbs are included for your

convenience).

BASIC PRECAUTIONS SHOULD BE FOLLOWED WHEN USING THIS PRODUCT:

(Inspect product carefully before using or re-using):

1. This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury and electrical

shock it should not be played with.

2. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of

heat.

3. Do not cover product with cloth, paper or any material when product is in use.

4. Do not hang ornaments or other objects from cord, wire, or light string. Hang ornaments only on

the tree itself.

5. For your safety, unplug the product when leaving the house, retiring for the night, or if left

unattended.

6. Do not let bulbs rest on the supply cord or on any wire.

7. Do not close doors or windows on the product or extension cords as this may damage the wire

insulation.

Illustration.1

8. Should you discover any of the following: a) cut, damaged, or frayed wire insulation; b) cracks in

the sockets; c) loose connections or exposed wires, please call us.

STORAGE: When storing the product, carefully remove the product from wherever it is placed, including

trees, branches, or bushes, to avoid any undue strain or stress on the product conductors,

connections, and wires. Disassembled tree can be stored in its original box. Store tree in a

cool dry place where the temperature does not exceed 100 degrees Fahrenheit.

US Patents:

US8,454,186 US8,454,187

US8,936,379 US8,974,072

Other patents pending.

See

www.williscorporation.com/about.html

UL MODEL # TMH7.5-5(2.04)

for a complete list of patents.