Akuvox A05 Series Manuel rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Akuvox A05 Series. Akuvox A05 Series 8 pages.

Hang the device on to the square hanger on the wall mounting bracket,

pull down the device to make it fall completely on to the square hanger

on the wall-mounting bracket, then use the Torx Wrench attached to

tighten the device with the Torx screw.

2.2 Device Installation with Digital Forehead Temperature Detector (Optional)

Take out the door phone and the

digital forehead temperature

detector and then take out back

cover,cable locking plate,and

rubber plug.

Installation is completed.

Fasten the detector on to the nuts on the device' s rear cover with two M3X10.5

screws using the Allen wrench attached, and lead the wires from the wall-mount

bracket and the detector through the square hole on the back cover, connecting them

to the corresponding interface of the main board. And then select a suitable size

rubber plug to push all the cables into the back cover. Fix the cable locking plate to

the back cover with two M2.5x6 screws.

Hang the device on to the square hanger on the wall mounting

bracket, pull down the device to make it fall completely on to

the square hanger on the wall-mounting bracket, then use the

Torx Wrench attached with to tighten the device with the Torx

screw.

Installation is completed.

E16/A05

Fasten the back cover with

four Torx screws using the

Torx wrench attached.