Ameriphone DIALOGUE XL 30 Manuel d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ameriphone DIALOGUE XL 30. Ameriphone DIALOGUE XL 30 15 pages. Amplified telephone
Imprimer la page
Setting up Your XL-30
There are five steps involved in
setting up your XL-30.
• Insert one 9 Volt alkaline battery
for extra bright ring flasher
(optional).
• Decide if you want the phone to
sit on a desk or hang on the wall.
• Connect the telephone components.
• Program up to to 12 telephone
numbers to call with the press of
a memory button.
• Setup special features
Installing the Backup Batteries
To add extra brightness to the XL-30's
ring flasher when you receive calls,
install one 9 Volt alkaline battery
(not included).
Insert
battery
here
Press in
here
to open
battery
compart-
ment
Figure 3 - Accessing the Batteries
4
To install new battery:
1. Slide open the battery compart--
ment cover on the bottom of the
telephone, (Figure 3).
2. Install one fresh 9V battery, and
replace the cover.
Setting the Dialing Mode
Set the dial mode switch to T (tone) if
you have touch tone service. Set the
switch to P (pulse) if you have rotary
dialing.
Connecting for Desk or Wall Mount
Desktop Use
1. Connect one end of the
telephone line cord to the "Line"
jack on the back of the XL-30
and the other end to the phone
outlet on your wall. Connect the
handset cord to the telephone
as shown in Figure 4.