Amerisolar Wolfram-BAT-5.12 Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Amerisolar Wolfram-BAT-5.12. Amerisolar Wolfram-BAT-5.12 15 pages.
Imprimer la pageWorldwide Energy and Manufacturing USA Co., Limited
3
Power
indicator
4
Soft start
switch
Running lights
5
Alarm
indicator
Capacity
indicator
6
DIP switch
RS-232
7
communic
ation
interface
External
communic
8
ation port
External
communic
9
ation port
10
Cascade
terminal
11
Cascade
terminal
12
Positive
interface
When the switch is turned to "ON",
the power indicator light is on..
Press and hold this button for 1 second
SW
while the switch key is "ON" to enter the
start or sleep mode
Green light. In standby, the indicator light
flashes. When charging, the indicator
RUN
light is always on. The indicator flashes
when discharging.
Red light. The indicator light flashes when
ALM
alarming. When protected, the indicator
light will stay on.
There are 6 green lights to show the
CHARGE
battery capacity, and each green light
represents 16.7% of the SOC.
ADD
(Reserved)
Console
Communication with host computer
CAN
Communication with external devices
Serial
Communication with external devices
Used for master-slave cascade
communication. Use a standard direct
Link Port 0
network cable connection, the host is
connected to PORT1, and the slave is
Used for master-slave cascade
Link
communication. Use a standard direct
Port 1
network cable connection, the host is
connected to PORT1, and the slave is
"+"
6
connected to PORT0.
connected to PORT0.
Positive interface