Door Knox VDP301 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Door Knox VDP301. Door Knox VDP301 13 pages. Wireless external door entry kit
Imprimer la page
VDP400 Door Entry Kit Operation
1. Setting up VDP301 camera unit
Connect the battery and fit the camera
into the rain shield. Ensure battery is
connected to correct polarity. The camera
unit can run directly from the battery or
be powered using the 100 ~ 240vAC 0.8A
power adapter that outputs 12vDC at 1.1A.
This can be used to charge the Lithium
3.7vDC battery or you can charge the battery
in the monitor using the USB plugtop.
Note the camera only works in the Rain Shield
2a. Setting up VDP404 monitor unit
Powering On and Off
After loading batteries, press and hold
the Power button to power up the unit.
The unit will enter standby mode with
no screen display if no further operation
occurs after 30 seconds. To power off
the unit when the screen is on, press and
hold the Power button.
2b. Turning Screen On and Off
When the screen is on, you can press the TALK button to turn off the screen display.
Pressing any button will turn the screen on again.
3. Talking and Unlocking
When visitors press the CALL button on the camera unit, the blue indicator light on the camera
unit will come on and will respond with two beeps. The monitor unit will ring immediately and
will display the image from camera unit. Pressing the TALK button on the monitor unit will
allow you to talk with the visitor. If you press the UNLOCK button it can remotely unlock the
door release mechanism if fitted. After the conversation, press the TALK button to hang up and
the monitor unit's display will close. If the call is not answered within 5 seconds, a picture will
be captured by the camera unit and saved automatically. If the call is not answered within 30
seconds, both the monitor unit and the camera unit will enter standby mode. The monitor unit
will indicate a missed call. After a call is answered, and if there is no further operation within
90 seconds, the monitor unit will hang up and enter standby mode automatically.
4. VDP404 Monitor
In standby mode, press the TALK button to start up the camera unit (means the screen is on), then
press MONITOR button and you can monitor outside and hear sound from the camera. The
monitor state will last for 30 seconds and then switches back to standby mode automatically if
there is no further operation. Press TALK button to talk or again to hang up.
Email:
Note that there is a magnet located in the rain
shield that will trigger the alarm in the camera
and on the monitor if the camera is removed
when power or battery is connected.
Doc XVDP400
Last Revised: 13/07/2017