astra telematics AT240 Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} astra telematics AT240. astra telematics AT240 5 pages. Advanced vehicle tracking device
Également pour astra telematics AT240 : Manuel de l'utilisateur (12 pages)

Imprimer la page

3. Check GPS and GSM status LEDs

Place the AT240 somewhere with clear view of the sky in correct orientation for a minute or

two, and then check the status LEDs as below:

GPS Status

During normal operation the LEDs should appear as below:

GPS

GSM/UMTS

4. After GPS and GSM status is confirmed, slide the AT240 into the enclosure

5. Fit the CB243 plug & play cable

GSM Status

double flash once per second

single or double flash every 2 seconds (home network)

fast flash, 50mS ON / 50mS OFF (roaming network)

Note orientation

Push the cable into the header until it clicks

(avoid waggling the plug from side to side)

GNSS Antenna

(SKY-SIDE)