Acer XV275K Manuel de l'utilisateur - Page 27
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Acer XV275K. Acer XV275K 30 pages.
Également pour Acer XV275K : Manuel de l'utilisateur (40 pages)
System
Mode - Standard
Picture
Input
Color
Auto Source
DP Format
Audio
Wide Mode
Hot Key Assignment
OSD
DDC/CI
System
HDMI Black Level
Quick Start Mode
1.
Press the MENU key to open the OSD.
2.
Toggle the button to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the button to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1, HDMI2, DP, TypeC.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
7.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Low Blue Light, Over Drive ) and shortcut keys 2 (Modes,
Volume, Brightness, Gamma, Contrast, Low Blue Light, Over Drive).
8.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9.
HDMI Black level: Select to set HDMI black level.
10.
Quick start mode: Select Off or On. Turn on to speed up boot speed.
Ambient Light:Select Off or Running Light/Flashing/Breathing/
11.
Blue/Red。
Power-off USB charge:Select Off or On。
12.
Picture
HDMI1
On
Color
DP1.4
Audio
Full
OSD
On
System
Normal
Off
Mode - Standard
C-Type
USB Port Seiect
144Hz
MAX Refresh Rate
Ambient Light
Off
HDMI 2.1
On
DSC
On
Power-off
off
USB charge
16