Akva SUBSEA FEEDER Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Akva SUBSEA FEEDER. Akva SUBSEA FEEDER 20 pages.

2 ABOUT AKVA SUBSEA FEEDER

The AKVA Subsea Feeder is manufactured by Nærøysund Aquaservice AS, who has the following

business address: Marøystrand Næringsområde, Marøystrandvegen 29, NO-7900 Rørvik,

Norway. Telephone: + 47 51 77 85 03. E-mail:

Variants of the AKVA Subsea Feeder: AKVA Subsea Feeder Long (13 m +)

The AKVA Subsea Feeder is a feeding system designed for sea-based fish farming sites. It

enables underwater feeding at a maximum depth down to 20 m. The purpose of feeding fish

deeper in the water column is to keep the fish at a certain depth and prevent lice from attaching,

and also enhance growth of the fish. Lice thrive near the surface, which is why keeping the fish

at a deeper level reduces the spread of lice in the cage.

Feed pellets are delivered to the cage through a normal air hose and enters the cyclone at the

top of the feeder tangentially, where the pellet speed is reduced. A spiral motion circulates the

pellets down into the cyclone until they reach the water level at the top of the main pipe and

then sink. The pellets are transported down into the distribution chamber and then distributed

evenly via a cone shape out to the fish through 12 branching pipes that spread the feed across

an area with a circumference of about 17 m. The feed is transported at a speed of up to 50 kg

per minute, and experience has shown that bird nets are not necessary when feeding with the

AKVA Subsea Feeder.

When using an long feeder (13 meter feeding depth or deeper) or using smolt feed, we

recommend creating a current in the water column in the main pipe. This is achieved by using

a pump to collect water from a deeper level, and pumping it up into the distribution chamber,

where an ejector generates negative pressure in the main pipe. Water from the same depth

as the pump is transported into the top of the main pipe to create a downward pressure that

forces the water down through the pipe. This downward motion is maintained as the pellet-and-

water mixture moves down through the main pipe. This motion ensures that the branching pipes

distribute the feed to the fish evenly at the correct depth.

Pellets are transported to the cage through a feed pipe, and enters the cyclone at the top of the

AKVA Subsea Feeder tangentially. Here, water is also added in the same tangential direction.

The water and feed combine and generates a cyclonic motion, that is maintained as the mixture

travels down through the main pipe and out in the desired depth. The water intake pipe is fitted

with a filter to prevent planctonic stages of salmon lice from entering the feeding system.

The sinker tube that encircles the branching pipes is weighted to provide stability.

The AKVA Subsea Feeder pump requires 230 V/50 Hz – 970 W and is delivered with a power

cable that reaches the edge of the cage, where the user then ensures sufficient power supply.

The feeder may be used without the pump, but in such case, we recommend removing the filter

in the riser pipe to avoid pellet build-ups. Choosing not to use a pump will require monitoring the

process with extra care, particularly for large doses.

DOCUMENT NO:

DOCUMENT PART:

DC10000901

10001800

AKVA Subsea Feeder Standard (7 m)

AKVA Subsea Feeder Short (4 m)

REVISION NO: