Astralpool KEFREN Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Astralpool KEFREN. Astralpool KEFREN 12 pages. Inground and half-inground bin
Également pour Astralpool KEFREN : Manuel d'instruction (12 pages), Manuel d'installation (12 pages)

Astralpool KEFREN Manuel d'instruction
7. Start up the pump and do a filter wash.
Perform the washing operation until the water comes out clean and clear in the
window of the selector valve.
8. Turn off the pump.
Position the selector valve to rinse and run the pump for about 15 seconds.
Stop the pump again and put the selector valve in the filter position.
9. Close the selector valve of the pool cleaner.
10. Connect the pump.
Note: Any changing of the position of the selector valve must be done with the
pump stopped. Otherwise, the filter or the installation could be damaged.
Replace the cover of the unit, affixing the rear part with the corresponding
screws.
IT IS RECOMMENDED THAT YOU USE A LOCK OR PADLOCK SO THAT
CHILDREN OR OTHER UNAUTHORISED PERSONS CANNOT ACCESS THE
INTERIOR OF THE UNIT
PROGRAMMING THE FILTER. See instructions for the programmer in the interior
of the control panel.
ONLY FOR MODELS WITH AN ELECTRICAL CONTROL PANEL
8
ATTENTION
.