Canon PIXMA MP495 Series Manuel de configuration du réseau - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de configuration du réseau pour {nom_de_la_catégorie} Canon PIXMA MP495 Series. Canon PIXMA MP495 Series 24 pages. Cartridge reset
Également pour Canon PIXMA MP495 Series : Manuel d'installation (22 pages), Manuel du réseau (20 pages), Manuel (8 pages), Manuel de configuration du réseau (9 pages), Manuel (4 pages)
Imprimer la page
- 1. Table of Contents
- 2. The Target Access Point Is Not Displayed (Detected) on the Detected Access Points
- 3. Set Printer Ip Address Screen Is Displayed
- 4. The Machine Is Not Displayed (Detected) on the Detected Printers List Screen
- 5. Problems During Network Setup
- 6. Configuring Wireless Lan Settings Manually
- 7. Other Troubleshooting Tips
- 8. Restoring the Machine's Default Lan Settings to Perform Setup Again
Network Setup Troubleshooting
This manual mainly describes problems you may encounter when setting up a network, and the possible
causes and solutions.
Find a description related to your problem and follow the solution.
If you cannot find a description for your problem or if you encounter a problem after setup, refer to the on-
screen manual: Basic Guide/Advanced Guide.
Screens are based on Windows 7 Home Premium.
•
Names of functions, etc. may differ from this manual depending on your access point or application
software.
List Screen
Protocol (encryption standard), and Network Key
P.2
P.2
P.2
P.3
P.3
The following symbols are used in this manual.
P.4
Instructions as notes for operation or additional explanations.
P.5
Description for Windows users.
Description for Macintosh users.
P.6
P.7
P.7
P.7
P.7
P.8
P.8
P.8
P.8
P.8
P.10
P.11