Astralpool LumiPlus 1.11 Manuel d'installation et d'entretien - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Astralpool LumiPlus 1.11. Astralpool LumiPlus 1.11 20 pages. Underwater lumiplus projector for fountains

Imprimer la page

6. ASSEMBLY AND FUNCTIONING WARNINGS:

• It is not recommended the use of sealing putty in this product and, anyway, you should use only products specifically

conceived to work with ABS, all those products of universal use remain excluded.

• The projector is designed TO OPERATE ONLY WITH A SAFETY TRANSFORMER.

• The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric compo-

nents which have been inserted or handled at locations other than its own premises.

• It is responsibility of the installer to ensure that no water gets inside the projector by means of the cables.

• The LumiPlus Projector for fountains is not designed to work submerged in seawater.

• This projector is resistant to pool treatments described below, always that the concentration values do not exceed the

following levels:

Chlorine

Bromine

Salt electrolysis (Na Cl)

Attention : Please note that the Ph of pool water always must be between 7.2 and 7.6.

TYPE OF TREATMENT

CONCENTRATION IN WATER

2 mg/l

5 mg/l

6 g/l