Canon PIXMA MP610 Series Manuel d'entretien - Page 45
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 pages. All-in-one photo inkjet printer
Également pour Canon PIXMA MP610 Series : Commencer ici (2 pages), Manuel complémentaire (6 pages), Brochure & Specs (2 pages), Manuel de démarrage rapide (40 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
MP610
4. MACHINE TRANSPORTATION
This section describes the procedures for transporting the machine for returning after repair, etc.
1) In the service mode, press the ON/OFF button to finish the mode, and confirm that the paper lifting plate of the rear tray is raised.
2) Keep the print head and ink tanks installed in the carriage.
See Caution 1 below.
3) Turn off the machine to securely lock the carriage in the home position. (When the machine is turned off, the carriage is
automatically locked in place.)
See Caution 2 below.
(1) If the print head is removed from the machine and left alone by itself, ink (the pigment-based black ink in
particular) is likely to dry. For this reason, keep the print head installed in the machine even during
transportation.
(2) Securely lock the carriage in the home position, to prevent the carriage from moving and applying stress to
the carriage flexible cable, or causing ink leakage, during transportation.
If the print head must be removed from the machine and transported alone, attach the protective cap (used when the packing was
opened) to the print head (to protect the print head face from damage due to shocks).
<4. MACHINE TRANSPORTATION>
43 / 43
TABLE OF CONTENTS