DoorKing 1601-295 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DoorKing 1601-295. DoorKing 1601-295 11 pages. Break-away octagon arm installation kit
Également pour DoorKing 1601-295 : Manuel du propriétaire (8 pages)

Imprimer la page

RUBBER BUMPER INSTALLATION

This rubber bumper is designed to install on a 14 ft aluminum octagon arm (not included) for a 1601 barrier gate operator.

It CANNOT be used with a 1602 or 1603 operators.

Installation

Slide on Rubber Bumper

The 3" trim end MUST side on first and the end

fits into the cover, see cover illustration.

Tip: Liquid soap will help rubber bumper

slide on easier.

Reinstall End Cap

Push a screwdriver through the hole in cap to release

spring while pushing cap on. Keep pushing cap on

until a "CLICK" is heard which locks it in place.

1601-269-G-7-21

Remove End Cap

Push a screwdriver through hole in bottom of end cap

to release spring while pulling cap off.

DoorKing Part Number

8080-089

Octagon Arm

Rubber Bumper

Cover

3" Trim End

Rubber Bumper

3" trim end MUST slide

on as shown.

120 S. Glasgow Avenue

Inglewood, California 90301

3" Trim End

U.S.A.