DoorKing 1601-355 Manuel du propriétaire
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DoorKing 1601-355. DoorKing 1601-355 8 pages. 1601 break-away octagon arm installation kit
Imprimer la page1601 BREAK-AWAY OCTAGON ARM INSTALLATION KIT
This kit is designed for a 1601 barrier gate operator WITHOUT convenience open ONLY. It CANNOT be used with a 1602 or 1603
operators. The kit provides a break-away bracket assembly for a octagon arm with OR without reverse/LED edge ONLY. When the
arm is raised, LEDs turn GREEN, and turns RED when lowered and remains RED in the down position. Arm will reverse if lowering
and a obstruction is encountered. If the arm is struck and breaks away (pivots in ONE DIRECTION ONLY, see below), gate operator
will automatically shut down. The arm manually snaps back into the release rollers to function normally again.
Break-Away Arm Direction Options
Arm will only pivot in ONE DIRECTION depending on which way the break-away arm bracket is installed. Choose the desired break-away
direction and install break-away arm bracket accordingly (note position of arm pivot bolt and release rollers).
Option #1
Arm
Pivot
Bolt
Installation
Install Bracket
Arm Pivot
Bolt Hole
B r e
a k -
A r m
A w
a y
B r a
c k e
t
R e
R o
Option #1
1601-269-D-2-20
Release Rollers
Break-Away
Direction
Keep this
area clear of
structures
Hub MUST already be installed on gate operator.
See 1601 Installation/Owner's manual for correct hub installation.
H u
b
l e a
s e
l l e r
s
A r m
D i r
e c t
i o n
Test hub UP and DOWN position
before installing bracket.
Copyright 2020 DoorKing
Option #2
17"
Minimal
Release
Clearance
Rollers
needed
R e
l e a
s e
R o
B r e
l l e r
a k -
A r m
A w
s
a y
B r a
c k e
Option #2
®
, Inc. All rights reserved.
1
DoorKing Part Number
1601-295
6"
Minimal
Clearance
needed
Arm
Pivot
Bolt
Break-Away
Direction
Keep this
area clear of
structures
H u
b
t
A r m
D i r
e c t
i o n
Arm Pivot
Bolt Hole
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.