Canon PIXMA MX860 series Pour commencer - Page 28

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Canon PIXMA MX860 series. Canon PIXMA MX860 series 38 pages. Setting up in default mode (tel priority mode) without an answering machine dsl/cable modem connection
Également pour Canon PIXMA MX860 series : Manuel (20 pages), Manuel complémentaire (6 pages), Manuel de dépannage (22 pages), Manuel (10 pages), Manuel du réseau (9 pages), Manuel (8 pages), Spécifications (2 pages), Manuel de configuration (17 pages), Manuel (18 pages), Mise en place (27 pages)

Canon PIXMA MX860 series Pour commencer
wireless network with
a single access point
d
Confirm that a checkmark appears next to the selected device, then
click Exit.
Wi-Fi router
Congratulations! You are finished with the setup.
Go to "Start Using Your MX860!" on page 37.
28
wireless network with
multiple access points
(example: Airport Extreme and Airport Express)
Wi-Fi router
Wi-Fi
router
wired network connecting
with an Ethernet cable

Wired Networks

If you will be connecting your MX860 to a wired LAN (Local Area
Network) using an Ethernet cable, follow the steps below.
1
Make sure the MX860 is ready
Ensure the MX860 is connected to your computer
with the USB cable and is powered on
You will need the USB cable only for the initial network
setup. Once your MX860 is connected to your network, the USB
cable is no longer needed.
2
Set the Network Connection Type
The MX860 is set at the factory to connect to a wireless (Wi-Fi) network.
To connect to a wired network using an Ethernet cable, change the
network connection type from the MX860 panel.
a
On the MX860, press the
b
or ►
Use the
button to select Settings, then press the
c
Device
Settings, then press the
Select
router
Menu
button.
OK
OK
button.
button.