Cognex DataMan 100 Manuel de référence rapide - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Cognex DataMan 100. Cognex DataMan 100 18 pages. Shd/c-mount kit removal instructions
Également pour Cognex DataMan 100 : Instructions de suppression (2 pages), Référence rapide (16 pages)
Imprimer la page
- 1. Getting Started
- 2. Setting up Your Dataman
- 3. Reference Information
- 4. Troubleshooting
- 5. Universal Mounting Bracket
- 6. Usb Connections
- 7. Output Wiring Example
- 8. Input Wiring Example
- 9. Training and Trigger Modes
- 10. Results Display
- 11. System Settings
- 12. Digital Output Wiring
- 13. Digital Input Wiring
- 14. Warnings and Notices
USB Connections
When connected to a PC over USB, the DataMan 100 appears as either a
COM port or as a standard USB keyboard. You control the connection type by
scanning the appropriate connection code
1
Connect direct to PC using
cable
DM100-USB-000.
or
Connect to PC through
I/O module
DM100-IOBOX-000.
2
Scan desired connection code:
USB Serial
NOTE: DataMan PC software
must be installed for this
connection type!
Optional
power
supply
COGNEX
DM100 IOBOX
IOB10 200-3001-R1R
DO NOT HOT PLUG
24VDC
OUTPUT
INPUT
RS232
USB
— +
0
1 C
0
1 C
USB Keyboard
NOTE: You cannot use
the setup tool with this
connection type.
RS-232 Connections
You can connect the DataMan 100 to a PC or other device over a standard
RS-232 serial connection. NOTE: You must supply external power to use
this connection type.
1
Connect direct to PC or
other device using cable
DM100-RS232-000.
or
Connect to through I/O
module
DM100-IOBOX-000.
2
Scan connection code:
RS-232 Serial
See page 27 for codes to set baud rate
and other RS-232 parameters.
COGNEX
DM100 IOBOX
IOB10 200-3001-R1R
DO NOT HOT PLUG
24VDC
OUTPUT
INPUT
RS232
USB
— +
0
1 C
0
1 C