Astralpool KEOPS Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Astralpool KEOPS. Astralpool KEOPS 12 pages. Inground and half-inground bin
Également pour Astralpool KEOPS : Manuel d'instruction (12 pages), Manuel d'installation (12 pages)

Imprimer la page
Astralpool KEOPS Manuel d'instruction
4. START-UP
1. Only in the KEOPS housing. Remove the t w o covers from the housing to begin
start-up. Unscre w the scre w s that attach the cover to the housing, before lifting it.
2. Open the filter and fill it half w ay w ith w ater. Protect the diffuser in the interior of
the filter so sand does not get into it.
3. Fill the filter w ith the appropriate quantity (indicated on the specifications label,
or up to 2/3 of the total filter height) of silex sand w ith a grain size of 0.4 - 0.8.
4. Assemble the T manometer, the seal, the manometer and the air purge cover.
Teflon tape is not necessary, as this point is sealed by the seal. Do not tighten the T
of the manometer w ith any tools; it is enough to do this w ith the hand.
5. Clean the remnants of silex from the mouth, cover and casket housing, and close
the filter. For more information, please consult the filter manual.
If the unit is belo w the w ater level, you w ill only need to open the input and output
valves and the air vent until the filter and the pump are full of w ater.
6. Put the valves in the follo w ing positions:
- SKIMMER
OPEN
- SUMP
OPEN
- POOL CLEA N ER
OPEN
- RETUR N
OPE N
- SELECTOR VALVE
WASH
7