Astrapool E25 Manuel d'installation et d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Astrapool E25. Astrapool E25 10 pages. Salt chlorinator
Imprimer la page
- 1. Operating Instructions
- 2. Table of Contents
- 3. General Overview
- 4. Chlorinator Control Installation
- 5. Cell Installation
- 6. Pool Preparation
- 7. Programming
- 8. Chlorine Output
- 9. Setting the Right Chlorine Output and Filtration Time
- 10. Chlorinator Maintenance and Troubleshooting
- 11. Maintenance of Your Chlorinator
- 12. Troubleshooting
- 13. Warranty
Record your Equipment details here for quick reference:
TROUBLESHOOTING
Your E-SERIES Chlorinator has diagnostic and safety features to make it easy to maintain your system. The table below
summarises potential faults and their causes.
Fault Indication
Potential Cause
No Flow
Pump turned off/disconnected or valves
closed
Blue wire disconnected from cell
Low salt
Salt level in pool has dropped too low
Pool water temperature is low
Cell has calcified
Cell has failed
Display blank
No Power to Controller
Fuse blown
Low/No chlorine in
Cables not connected to cell
pool
Timer period too short
Chlorine output level too low
Filter needs backwashing
Ph too high
Pool stabiliser (cyanuric acid) too low
Salt level too low
Clock loses time
Battery life expired
when mains power
removed
INST 363 E Series Salt Chlorinator V05.17
Model No.:
____________________________
Serial No.:
____________________________
Remedy
Ensure valves/pump on
Connect Blue sense wire to cell
Take sample of water to pool
shop and check salt level – add
salt as recommended.
Add salt and turn chlorinator
output down until the water is
warmer
Clean cell
Call for Service
Plug in controller and ensure
mains power available
Have a service technician
replace fuse (3 amp slow blow)
Connect cables
Increase timer period –
particularly in summer
Increase chlorine output
Backwash filter
Balance pH level to 7.4 – 7.6
Increase Stabiliser between 30
and 60 ppm
Increase salt to above 6000 ppm
Call a technician
8