Ames Instruments 64013 Manuel du propriétaire et consignes de sécurité - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et consignes de sécurité pour {nom_de_la_catégorie} Ames Instruments 64013. Ames Instruments 64013 16 pages. Digital clamp meter. ac 600v cat iii

Imprimer la page
continuity Measurement
Test continuity between two
points of a circuit.
WARNING! To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring.
1.
Plug black test lead into COM Jack.
Plug red test lead into INPUT Jack.
2.
Turn Rotary Switch to the

capacitance Measurements

Measure capacitance up to 100μF.
WARNING! Turn off all power and fully
discharge capacitors on the circuit
under test before measuring.
1.
Plug black test lead into cOM Jack.
Plug red test lead into INpUT Jack.
2.
Turn Rotary Switch to the
3.
Press SEL button until nF is displayed.
Page 12
position.
position.
For technical questions, please call 1-888-866-5797.
3.
Press SEL until
4.
Connect the test leads across
the circuit to be measured.
5.
Read measured resistance on the
Display. If measured resistance is less
than 50Ω ± 20Ω, Meter will beep.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
4.
Carefully touch capacitor
leads with tips of probes.
5.
Read measured capacitance
on the Display.
Note: If capacitor is short
circuited or capacitance is too
high, Display will read OL.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
and store capacitor and Meter.
is displayed.
Item 64013