Dop Choice OCTA 5 Mode d'emploi - Page 2

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Dop Choice OCTA 5. Dop Choice OCTA 5 2 pages.

SET UP THE OCTA 5 & 7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
A
ONLY OCTA 7
1.) Unpack and unfold the
SNAPBAG
OCTA.
®
3.) Release the Velcro
strips.
®
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany)
T +49 89 95 45 742-40 · [email protected] · www.dopchoice.com
B
C
2.) Push the rod extensions to the front and connect them
to the other rod-end.
4.) Push in the 2 upper rods first to the RABBIT-EARS
continue with all other rods.
5.) Attach the Velcro
strips to the end of the SNAPBAG
®
Make sure the SNAPBAG
is on full tension by utilizing
®
the Velcro
strips before installing the diffusor.
®
6.) Mounting Point for the safety Cable
Always secure every accessory with a suitable safety cable
from falling when the primary mounting method fails.
Safety cable
DISASSEMBLE THE OCTA 5 & 7
OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG
2.) Release the Velcro
strips to take off the
®
tension on the rods.
®
.
®
4.) Release the rod extensions and pull them back to the
very end of the white elastics.
ONLY OCTA 7
6.)
Important:
the rod extensions must be pulled back to the
very end in order to fold the SNAPBAG
®
DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany)
T +49 89 95 45 742-40 · [email protected] · www.dopchoice.com
1.) Take off the diffusor, fold it together and
put it back into the plastic bag.
3.) Pull out the rod ends on the RABBIT-EARS
start with the lower ones first.
ONLY OCTA 7
5.) Fold the SNAPBAG
as shown in the picture.
7.) Put the SNAPBAG
as shown in the picture!
designated transportation bag.
®
together
®
back into the
®