Air Force Pro 80 Manuel d'utilisation et d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Air Force Pro 80. Air Force Pro 80 17 pages. Air force pro 15; 40; 60; 80 linear air pump, oil-less compressor

Imprimer la page
This product must be connected to a grounded, metallic, permanent wiring system, or an
equipment-grounding terminal or lead on the product.
Power Supply must conform to all required safety codes and be installed by a qualified
electrician. Check and Read rating labels listed on product name plate for supply voltage.
For a permanently connected product:
Extension Cords:
2)
3)
Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle
This product must be connected to a grounded, metallic, permanent wiring system, or an
that accepts the plug on the product. Make sure your extension cord is not damaged. When
equipment-grounding terminal or lead on the product.
using an extension cord, be sure to use one heavy enough to carry the current your product
draws. An undersized cord results in a drop in line voltage and loss of power and overheating.
Power Supply must conform to all required safety codes and be installed by a qualified
(NOTE: Table 1 shows the correct size to use depending on cord length and nameplate
electrician. Check and Read rating labels listed on product name plate for supply voltage.
ampere rating. When in doubt, use the next heavier gauge. The smaller the gauge number,
the heavier the cord.)
Extension Cords:
3)
Exception: A 2-conductor or 3-conductor extension cord may be used for a double-insulated
Use only a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot receptacle
or 2-wire product.
that accepts the plug on the product. Make sure your extension cord is not damaged. When
using an extension cord, be sure to use one heavy enough to carry the current your product
draws. An undersized cord results in a drop in line voltage and loss of power and overheating.
(NOTE: Table 1 shows the correct size to use depending on cord length and nameplate
ampere rating. When in doubt, use the next heavier gauge. The smaller the gauge number,
the heavier the cord.)
Exception: A 2-conductor or 3-conductor extension cord may be used for a double-insulated
or 2-wire product.

OPERATION

Use only recommended air handling parts acceptable for pressure not less than 10 psi. When
provided, motor terminal covers must be in place for safe operation. Product surfaces may
become hot during operation. DO NOT direct air stream at body. Air stream from product may
contain solid or liquid material that can result in eye or skin damage, wear proper eye protection.
DO NOT spray flammable or combustible liquid. Failure to follow these instructions can result in
burns, eye injury or other serious injury.
OPERATION
It is your responsibility to operate this product at recommended duty pressure and ambient room
Use only recommended air handling parts acceptable for pressure not less than 10 psi. When
temperature.
provided, motor terminal covers must be in place for safe operation. Product surfaces may
become hot during operation. DO NOT direct air stream at body. Air stream from product may
contain solid or liquid material that can result in eye or skin damage, wear proper eye protection.
DO NOT spray flammable or combustible liquid. Failure to follow these instructions can result in
burns, eye injury or other serious injury.
Table 1
Minimum gauge for extension cords
Table 1
Minimum gauge for extension cords
5
5