Cognionics CGX Mobile-128 Manuel - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cognionics CGX Mobile-128. Cognionics CGX Mobile-128 20 pages.
Imprimer la page
Preparation
6. Check Power Status, Trigger Status, and Battery
Status Lights On The Amplifier
Power
Headset Off
Off
Headset On
Green
Low Battery
Yellow
Critically Low Battery (replace immediately)
Red
Trigger
Trigger Out Of Range
Off
Trigger In Range
Blue
Triggers Received
Flashing Blue
Battery
Battery OK
Off
Battery Low
Red
Battery Critically Low
Flashing Red
7. Insert Bluetooth Dongle
Plug the dongle into your computer and Windows should
automatically install the correct drivers. Verify driver
installation by checking the Device Manager for problems,
marked by a yellow exclamation mark.
The dongle is specific to each headset.
•
For best performance, ensure a clear line of sight
•
between the dongle and the front of the headset.
If Windows did not successfully install the driver for
the dongle, refer to the FTDI driver installation manual
on our website.
Each Mobile-128 is permanently paired to a receiver
dongle. The pair automatically discover and initiate a
connection when both are powered on and within a 10m
range.
The light on the dongle indicates its current state:
Power On, Not Paired
Green
Searching For Device
Purple
Device Found
Blue
Data Transmitting
Flashing Blue
8. Start The Acquisition Software
Once you've established a connection, data should begin
to stream.
Double click on the CGX Acquisition software icon. You
should see
CGX Mobile-128
If you do not see the name CGX Mobile-128, remove
and re-insert the dongle and restart the software.
under
Discovered Devices.
5
Power Trigger Battery
Indicator Lights On Dongle
Idling
Green
Searching For Device
Purple
Device Found
Blue
Data
Flashing Blue
Transmission