Canon XF705 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Canon XF705. Canon XF705 12 pages. Ip streaming guide, vlc version
Également pour Canon XF705 : Manuel (9 pages)

Imprimer la page

Specifications

Terminals

• SDI Terminal

BNC jack, output only, 0.8 Vp-p / 75 , unbalanced

HD-SDI:

SMPTE 292, SMPTE ST 299-1

222

3G-SDI:

SMPTE 424, SMPTE 425, SMPTE ST 299-2

6G-SDI:

SMPTE ST 2081

12G-SDI:

SMPTE ST 2082

Embedded audio, time code (VITC/LTC)

Supplemental displays (superimposed onscreen displays, peaking, zebra pattern, magnification, waveform

monitor) can also be output.

• HDMI OUT Terminal

HDMI connector, output only

Time code and supplemental displays (superimposed onscreen displays, peaking, zebra pattern,

magnification, waveform monitor) can also be output.

• INPUT Terminals (INPUT 1 and INPUT 2)

XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced

Analog Inputs

MIC setting: –60 dBu (volume center, full scale –18 dB) / 600 , microphone attenuator: 20 dB

LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 k

Digital Inputs (AES/EBU)

AES3 standard (48 kHz, 24 bit, 2ch) / 110 

• MIC Terminal

 3.5 mm stereo mini-jack, –72 dBV (manual volume center, full scale –18 dB) / 5.6 k

Microphone attenuator: 20 dB

• × (headphone) Terminal

 3.5 mm stereo mini-jack, -

• USB Terminal: mini-B receptacle, Hi-Speed USB, output only

• G-LOCK/SYNC Terminal

BNC jack, 1.0 Vp-p / 75 

GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal

• TIME CODE Terminal

BNC jack, input/output

Input setting: 0.5 Vp-p to 18 Vp-p / 100 k;Output setting: 1.3 Vp-p / 50  or less

• REMOTE A Terminal, REMOTE B Terminal

REMOTE A:  2.5 mm stereo sub-mini jack

REMOTE B: Circular 8-pin jack (for the optional RC-V100 Remote Controller, RS-422 interface)

•

(Ethernet) Terminal: Ethernet, 1000BASE-T compatible

Power/Others

• Power Supply (rated): 14.4 V DC (battery pack), 24.0 V DC (DC IN)

• Power Consumption (recording using the LCD screen with SDI terminal output enabled (3G-SDI))

XF-HEVC clips, 3840x2160, 160 Mbps: 21.5 W (59.94P), 20.8 W (50.00P)

XF-HEVC clips, 1920x1080, 60 Mbps:

XF-AVC clips, 1920x1080, 45 Mbps:

• Operating Temperature: 0 – 40 °C (32 – 104 °F)

to –8 dBV (16  load, volume range Min to Max) / 50  or less

20.6 W (59.94P), 19.9 W (50.00P)

19.1 W (59.94P), 18.8 W (50.00P)