Canon CanoScan FS2710 Manuel du produit - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Canon CanoScan FS2710. Canon CanoScan FS2710 31 pages.
![Canon CanoScan FS2710 Manuel du produit](/uploads/products/server2/1163336/1163336.jpg)
Inserting Film
35 mm Negative and Positive Film (Sleeve Type)
Load 35 mm negative films and positive films that haven't been slide mounted
into the film holder for insertion into the film scanner.
1.
Have the film and film holder at hand.
2.
Slide the guide on the film holder to the 'R' position.
•
Slide the guide all the way until it rests against the stopper.
3.
Open the film holder.
•
Gently twist the tab at the end of the film holder and open one half as shown.
4.
Load the film into the holder.
•
Place the film face up in the groove so that the image is viewed correctly when
the 'R' on the film holder is facing up.
•
The orientation of an image can be corrected with the rotate command of
the scanning software, CanoCraft FS or Plug-in module FS, if the film is
incorrectly loaded.
•
Read the section entitled Final Film Format
ing film mounts and sleeves.
CanoScan FS2710 Film Scanner
(p. 26)
for information regard-
15