Akw TF75 Instructions d'installation et d'entretien
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} Akw TF75. Akw TF75 2 pages. Gravity waste
ALWAYS
ALWAYS
ALWAYS
NEVER
DO NOT
BEWARE
ALWAYS
Ensure waste pipe end and both joint surfaces of the Universal
elbow and TF75 are clean and grease free.
Apply a coating of adhesive to both surfaces of each joint and
assemble immediately.
WIPE AWAY ALL EXCESS ADHESIVE.
Failure to install this AKW MediCare product in accordance with supplied instructions or the making of
unauthorised modifications will invalidate any warranty and will affect product safety.
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in
imperial, therefore all dimensions are approximate and subject to manufacturing tolerances. This information is furnished upon the
condition that the person receiving it shall make his/her own tests to determine the suitability thereof for his/her particular purpose.
AKW Medi-Care Limited, Liberty House, Pointon Way, Hampton Lovett, Droitwich Spa, WR9 0LR
Tel.+44 (0) 1905 823298 - Fax. +44 (0) 1905 823297 - www.akw-medicare.co.uk
© 2011 AKW Medi-Care Limited
STOP
read these installation instructions carefully before
installing this product and leave with the end user.
match the correct waste to the shower base.
have the waste installed by a trained and
experienced skilled craftsman.
use the waste without the unit fully assembled.
place matches or cigarettes on or near this product.
The following plastic materials are used in this
product:
Acrylonitrile Butadiene Styrene (ABS), Nitrile Rubber
A child finger trap may be present during the
handling or use of this product.
Keep fingers clear of the gaps between the cover,
and the locking ring.
TF75 Gravity Waste
Installation And User Care Instructions
Universal solvent socket joint for vertical or horizontal outlets.
Patent GB2402946
For full waste specifications see the current AKW MediCare catalogue.
03-047-010-06
75mm water seal trapped waste for wet floors
Colour: White RAL9016
Internal Building use only
WRcNSF tested to BS EN 274-2:2002
Installer: Please ensure that this information is left
with the end user of this product.
EU registered Design
000189105-0001