Ametek Solartron Metrology Wigauge WHT Manuel d'utilisation et d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Ametek Solartron Metrology Wigauge WHT. Ametek Solartron Metrology Wigauge WHT 17 pages. Wireless handtool

Imprimer la page

6.0 Battery Pack

Caution

Before changing the battery pack clean the WHT to avoid contamination of the contacts.

6.1 Removal of battery pack

To remove the battery pack for replacement, or charging, remove the plastic cover from the top and turn the locking screw 90 degrees anticlockwise to

release the battery pack (release position displayed in the diagram below). Then pull the battery pack from the WHT.

6.2 Fitting a battery pack

Push the battery pack onto the WHT body, ensure that the locking screw is orientated as shown in the diagram (release position slot in line with charging con-

nector); turn the locking screw through 90 degrees in a clockwise direction to latch the battery pack (locked position). Replace the plastic cover.

Release Position

Locked position

6.0 Battery Pack

502848 Issue 5