Canon DR-6080 Référence rapide - Page 15

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Canon DR-6080. Canon DR-6080 17 pages. Canon all in one printer user manual
Également pour Canon DR-6080 : Manuel d'entretien (22 pages)

Imprimer la page

Error Code

d06

Exx

J01

J02

J18

P00

P02

P03

Cause and Solution

Double feed detected by document length and ultrasonic.

Check the document against the scanned image, and scan the

document again.

Scanner internal error

Service call error. The scanner must be repaired by a service

engineer. Turn OFF the power, contact your service representative,

and notify them of the error code.

Staple detected, document transfer stopped.

Open the upper scanner and remove the document. Check to see if

the document was scanned correctly, and scan the document again.

Staple detected, document feed stopped.

Open the upper scanner and remove the document. Check to see if

the document was scanned correctly, and scan the document again.

Detected a skewed document, document feed stopped.

Open the upper scanner and remove the document. Check to see if

the document was scanned correctly, and scan the document again.

Document detected in the scanner when the power was

turned ON or the upper scanner was open.

Remove the document that was left in the scanner. (See p.11)

Detected a document that is longer than the document that

is set.

Open the scanner and remove the document. Check to see if the

document was scanned correctly, and scan the document again.

Detected a document that is shorter than the document that

is set.

Open the scanner and remove the document. Check to see if the

document was scanned correctly, and scan the document again.

A complete list of error codes and solutions to other types of

scanner trouble can be found in Chapter 6 of the Instructions

manual ("Troubleshooting").

T R O U B L E S H O O T I N G