Canon IMAGECLASS MF4150 Manuel de démarrage - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Canon IMAGECLASS MF4150. Canon IMAGECLASS MF4150 19 pages. Laser multifunction
Également pour Canon IMAGECLASS MF4150 : Fiche technique (2 pages), Manuel de démarrage (19 pages), Brochure (2 pages)

Imprimer la page
Canon IMAGECLASS MF4150 Manuel de démarrage

Set the Machine for Receiving Faxes

Select the Receive Mode that Suits Your Needs

Follow the chart below to determine the correct receive mode for your needs.
Do you intend to use the machine to
receive voice calls?
Yes
Do you intend to use an answering
machine with the machine?
No
Do you intend to receive faxes
automatically?
Yes
Do you subscribe to a NET SWITCH
service?
Yes
NOTE
– The answering machine must be connected directly to the machine for <AnsMode> to work. (See "Connect Telephone
Cables," on p.9.)
– The external telephone must be connected to the machine for <FaxTel> or <MANUAL> to work. (See "Connect Telephone
Cables," on p.9.)
– Voice mail is not supported with <AnsMode>.
– The <NET SWITCH> mode is available for certain countries only and requires subscription to a network switch service.
Contact your telephone company for availability.
19
<FaxOnly>
No
Answers all calls as faxes.
Yes
<AnsMode>
Receives faxes automatically
and records voice messages.
No
<MANUAL>
Does not answer any calls.
You have to manually receive
faxes.
<FaxTel>
No
Switches between fax and
voice calls automatically if an
external telephone is
connected to the machine.
<NET SWITCH>
Distinguishes between fax and
voice calls.
(MF4140/MF4150 Only)

Set the Receive Mode

1
2
Press [Additional
Use [
Functions].
select <5 FAX SETTINGS>,
then press [OK].
4
5
Use [
] or [
] to
Use [
select <3 RX MODE>,
select the receive mode,
then press [OK].
then press [OK].
NOTE
– For <AnsMode>, make sure
an answering machine is
connected to the machine.
– If <AnsMode> or <FaxTel>
is selected, you can select
some settings as below:
<AnsMode>
– <AnsMode CHK TIME>
– <FAX DETECT TIME>
<FaxTel>
– <RING START TIME>
– <F/T RING TIME>
– <F/T SWITCH ACTION>
NOTE
For details, see Chapter 1,
"Setting the Receive Mode" in
the Advanced Guide.
3
] or [
] to
Use [
] or [
] to
select <3 RX SETTINGS>,
then press [OK].
6
] or [
] to
Press [Stop/Reset] to
return to the standby
mode.
20