Dorani Limited DORVT Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dorani Limited DORVT. Dorani Limited DORVT 7 pages. Touch video intercom system, 2 wire system
Également pour Dorani Limited DORVT : Manuel d'installation (8 pages), Manuel d'installation (14 pages)
Imprimer la page
PROGRAMMING CODES INTO KEYPAD DOOR STATIONS
Program New Master Code
3 Beeps = Incorrect setting, code or location
Long Beep = Correct
This is the main programming code Keep this new code in a safe place)
Step 1: Press 1234 + # Key– Door station should go white
Step 2: Enter 01 followed by # - Door Station should go Yellow
Step 3: Enter 4 digit code followed by # - Door station should go Green then White
This is now the new Installer Code
Program new User Codes 20 – 29 for Door Release 1
Step 1: Press Master Code + # Key (e.g. 1234#) – Door station should go white
Step 2: Enter User Location to Program (20 – 29) followed by # - Door Station should go
Yellow
Step 3: Enter 4 digit code followed by # - Door station should go Green then White
Repeat steps 2 & 3 to program more users – Press * to exit programming at any time
TO DELETE OR CHANGE A CODE – THE USER CODE MUST BE CHANGED TO "0" FIRST,
Note: If RLC adapter is installed for a seconday release of the same door station separate
users and codes need to be programmed for these. This is done the same as above using
User numbers 60 - 69
The following is a record of codes stored into the system. Keep this up to date and
in a safe location for future reference for reprogramming.
Your Installer Code Is
User 20
User 21
User 22
User 23
User 24
User 25
User 26
User 27
User 28
User 29
THEN REPROGRAMMED.
_________________
User 60
User 61
User 62
User 63
User 64
User 65
User 66
User 67
User 68
User 69
6