Astro Pneumatic 1221 Manuel de l'utilisateur
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Astro Pneumatic 1221. Astro Pneumatic 1221 5 pages.
Imprimer la page
1240 - Blue Composite Body 1/4" 90° Angle Die Grinder
Front Exhaust - 20,000rpm
• Composite handle reduces vibration
• Rib textured handle provides a firm grip
• Lever throttle for feathering control
• Compact and lightweight
• Front exhaust
• Built-in regulator
Air Inlet Thread NPT:1/4"
Specifications:
Collet Size:1/4"
Air Hose I.D. Size: 3/8" (10mm)
Free Speed:20,000rpm
Avg. Air Consumption: 3cfm
Overall Length:5-3/4" (146mm)
Sound Pressure: 92.3 db(A)
Net Weight:1lbs. (.45kg)
Sound Power: 103.7 db(A)
Motor:1/3hp
Vibration Level: less than 2.5 m/s2
Air Pressure: 90-120psi
1205 - Composite Body 1/4" Mini Die Grinder with Safety
Lever - 25,000rpm
• Composite handle reduces vibration
• Rib textured handle provides a firm grip
• Lever throttle for feathering control
• Compact and lightweight
• Front exhaust
• Built-in regulator
Air Inlet Thread NPT: 1/4"
Specifications:
Air Hose I.D. Size: 3/8" (10mm)
Collet Size:1/4"
Free Speed: 25,000rpm
Avg. Air Consumption:. 3cfm
Sound Pressure: 92.3 db(A)
Overall Length: 4-3/4" (120mm)
Net Weight: 13/16lbs. (.37kg)
Sound Power: 103.7 db(A)
Vibration Level: less than 2.5 m/s2
Motor:1/3hp
Air Pressure: 90-120psi
2181 - 8pc. Double Cut Carbide Rotary Burr Set 1/4" Shank
• Set Includes:
SA-5: Cylindrical shape 1/2" X 1"
SA-3: Cylindrical shape 3/8" X 3/4"
SC-3: Cylindrical radius end 3/8" X 3/4"
SC-1: Cylindrical radius end 1/4" X 5/8"
SD-1:
Ball shape 1/4"
SD-3: Ball shape 3/8"
SF-3: Tree shaped radius end 3/8" X 3/4"
SF-5: Tree shaped radius end 1/2" X 1"
• Should not exceed maximum 30000rpm
• All above burrs are 1/4" shank
1221
Blue Composite Body 1/4" 90° Angle Die Grinder
AND 1/4" Mini Die Grinder with Safety Lever
AND 8pc. Double Cut Carbide Rotary Burr Set 1/4" Shank
www.astrotools.com
1 YEAR LIMITED WARRANTY
•Astro Pneumatic Tool Co. warrants our products to the original
user against defective material or workmanship for a period of 1
year (except where noted on our price schedule) from the date
of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or
other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor
should direct the original user to return the product (with the
exceptions listed below) with the distributor's name, address,
adequate proof of date of purchase or a copy of warranty card,
and a short note explaining the problem. Failures caused by
accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representa-
tives must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty. The
rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness for a
particular purpose. Some states do not allow the exclusion of
limitations of incidental or consequential damages so the above
limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
Unpacking
When unpacking, check the parts diagram and part number listing
on pages 3-5 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.