Dorcy LT-033 Manuel d'utilisation et d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'instruction pour {nom_de_la_catégorie} Dorcy LT-033. Dorcy LT-033 2 pages. Led bluetooth lantern
How To Charge
Fully charge the lantern use only the Micro USB charging cable.
1. Connect the micro USB with the USB charging cable into the lantern
charging port at the back of the lantern, and the other end of USB charging
cable into your home power outlet (DC5V power sources). Or use a comput
er other 5V/1A power source. Plug the USB charging cable into the USB port.
2. Standard charging time is around 3 hours. (Depending on the life of the
battery, the charging time will vary). Be careful not to charge it for more
than 8 hours. Over charge will damage the battery.
NOTE: The charging time and the operation time may vary depending on the use environment.
Operation Instruction
Operation with light function
To turn the lantern ON, press the main button.
Adjust the light settings (High / Low / Red) by pressing the main button.
To turn the lantern OFF, press the main button till to o the light.
Operation with audio function
To play audio from a Bluetooth device, you need to pair the device with the
lantern speaker.
1. On your Bluetooth device, turn on Bluetooth and scan for devices in its
Bluetooth menu.
2. Turn on the Bluetooth when powering up for the rst time, the lantern
speaker is discoverable for 2 minutes and is ready for pairing. A short
sound will indicate the Bluetooth is on.
3. The model code of this lantern "DS-ML-903V1" will appear on the device
list of your Bluetooth device, select the lantern. The Bluetooth status will
show on your Bluetooth menu after pairing is established. The lantern
speaker is ready to play music.
Note: If the Bluetooth turns o after ve minutes, it has enters power saving mode. Slide the
power switch o and then turn on to wake the Bluetooth, and try pairing your device again.
Repeat step 3.
Note: The lantern speaker operates with a single pair devices mode. If you pair the speaker with
another device, the device least recently connected needed to be un-pair with the speaker rst.
Repeat steps 2 and 3 above
Remark: Connect audio cable (not included) directly to AUX audio plug to play music without
Bluetooth connection.
1
ON
Bluetooth devices
3
DS-ML-903V1
Model No.:
CONNECT
Bluetooth devices
"Low, High, Red" light switch
2
>
Turn on Bluetooth
Bluetooth devices
>
PAIRED
Bluetooth devices
Status indicator:
The battery power indicator light indicates how much
battery life remains for the mode in use.
Light ashing = Charging
All lights on
Three light on = Around 75% battery life
Two light on = Around 50% battery life
One light on = Low battery > Around 25% battery life
Charging
Operation with power bank function
1. Select the suitable USB charging charger (di erent devices require
di erent charging cables for charging).
2. Put the USB cable into lantern USB output port, then put the other
side of the cable into the charging device (mobile, tablet, etc.) The device
will then start charging.
3. When the lantern is out of battery, it will stop charging.
Status indicator :
SEARCHING
Trouble Shooting
The lantern speaker doesn't work or it won't pair
• Try moving your device closer.
• Is the lantern turned on and charged?
• Turn the Bluetooth o and then on to wake it.
• Is Bluetooth enabled on your device or computer?
• Try repeating the setup procedure in this guide or pair with a di erent
Bluetooth device.
• The speaker plays music from one device at a time. Unpair the device not
being used. (Refer to your device documentation for help.) Pair a new
device using the setup procedure.
• If pairing with a computer, specify the lantern speaker as the audio out
device on the computer.
= Fully charged 100% battery life
100% battery life 75% battery life 50% battery life 25% battery life
75% battery life
100% battery life
Status
indicator
(Di erent devices require
di erent charging cables
for charging)
25% battery life
50% battery life