Flying Lemon cytrynka PDB Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Flying Lemon cytrynka PDB. Flying Lemon cytrynka PDB 20 pages. For power distribution board for zmr/qav/rcx 250 class copters

Imprimer la page

WARNING:

gyro. Don't ask why just don't do it

Flight controller installation

Using naze32 flight controller with our cytrynka PDB is the best and easiest choice.

User must only solder pins on naze and Conversion Board, connect it together with

PDB, setup in configuration and fly.

Just remember to solder pins on bottom side. Angled pins for PWM outputs must be a

little bit prepared before soldering. Longer side of pins must be shortened about

2mm.

WARNING:

cleanflight by entering the following:

Don't forget to check that all the movements are right in the GUI! If

you made a mistake and the movements are not right, your quad will

crash!!

Never cut pins directly on FC. This may destroy your

Remember to change the orientation in baseflight or

set align_board_yaw = 90

save

naze32