Astro Tool 615717 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Astro Tool 615717. Astro Tool 615717 2 pages. 8-step adjustable crimp tool

Imprimer la page

SAFETY C LIP

GENERAL

The Astro Tool 615717 8-step crimp tool is a

cycle controlled, precision crimp tool capable of

crimping wire barrel sizes 20 to 28.

All Astro tools are designed to comfortably fit in

your hand for less fatiguing hand operation.

Observe the precision ratchet action by opening and

closing the tool several times. Note that the tool

cannot be opened without fully completing the

crimp cycle.

BASIC TOOL OPERATION

NOTE: For proper crimping, the Basic Tool

must be used with an appropriate Positioner

Assembly.

1. Tool must be in full open position.

Remove the safety clip from the Bayonet

Socket.

Select the proper Positioner for the contact

to be crimped.

ASTRO TOOL CORP.

CONNECTOR ASSEMBLY TOOLING

615717 8-STEP ADJUSTABLE CRIMP TOOL

M22520/2-01(NSN: 5120-00-165-3910)

Place the Positioner in the Bayonet Socket.

Line up the pins on the Positioner with the slots on

the Bayonet Socket. Depress the Positioner and

rotate 90° clockwise and release. The Positioner

should lock in place.

Install safety clip back into the Bayonet

Socket (optional).

6. Consult the Data Plate on the face of the

Positioner for the proper selector setting. With tool

handles in the open position, grasp the Adjustment

Knob; raise and rotate until the proper selector

setting is lined up with the arrow on the Top

Handle. Release the Adjustment Knob.

7. Insert the contact through the Indenter

Opening and into the Positioner.

8. Insert the wire into the contact. Squeeze the

handles until the Tool comes to a positive stop.

Release the handles and the tool will return to the

full open position.

9. Remove the completed crimped assembly.

Do not press down on the wire during the crimp cycle.

CAUTION:

9-26-14 TI717-12-4