Canon SCANFRONT M11058 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Canon SCANFRONT M11058. Canon SCANFRONT M11058 28 pages. Network scanner

Imprimer la page

● Do not pull directly on the power cord. When

disconnecting the power cord, grasp the plug and

remove it from the outlet.

● Keep the area around the power plug clear of

objects so that the power cord can be

disconnected easily in an emergency.

● Use only the AC adapter provided with this

scanner. Also, do not use the AC adapter provided

with the scanner with any other electrical devices.

Model: MG1-3968

● If you have any questions regarding the power

supply, contact your local authorized Canon dealer

or service representative for further information.

❏ Moving the Scanner

● When moving the scanner, always hold it with both

hands to avoid dropping it. The weight of the

scanner unit is approximately 3.4 kg.

● Before moving the scanner, make sure the

document tray is closed and the interface cable

and AC adapter are disconnected. If the scanner is

transported with these items connected, the plugs

and connectors may be damaged due to

excessive force applied to them during movement.

❏ Handling

WARNING

Note the following precautions whenever using the

scanner. Failure to do so may result in a fire or

electric shock.

■ Never use alcohol, benzene, paint thinner, aerosol

sprays, or any other highly flammable substance

near the scanner.

■ Do not cut, damage, or modify the power cord or

AC adapter. Do not place heavy objects on the

power cord or AC adapter, and do not pull or

excessively bend the power cord.

■ Never connect the power cord when your hands

are wet.

■ Do not connect the scanner to a multiplug power

strip.

■ Do not knot or coil the power cord, as this may

result in a fire or electric shock. When connecting

the power cord, make sure that the power plug is

securely and completely inserted into the power

outlet.

■ Do not use power cords and AC adapters other

than the power cord and AC adapter provided with

this scanner.

■ Never try to take the scanner apart or modify it in

any way.

■ Never try to take the AC adapter apart or modify it

in any way, as this is dangerous and may lead to a

fire or electric shock.

■ Do not use flammable aerosol sprays near the

scanner.

■ When cleaning the scanner, turn the power OFF

and disconnect the power cord from the power

supply.

■ Clean the scanner using a slightly dampened cloth

which has been well wrung out. Never use alcohol,

benzene, paint thinner, or any other flammable

substances.