Flying Tech G-Force250 Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Flying Tech G-Force250. Flying Tech G-Force250 17 pages. Fpv racing drone kit
Imprimer la page25. With the electronics setup and tested; you're ready to fit the top plate. Firstly attach the anti
vibration camera mount using the four rubber damping balls. Finally, secure the top plate to the
aluminum standoffs using the remaining M3x6mm button head screws, applying a drop of thread
lock to each screw.
26. All that is left to do now is to attach the prop adapters and then the props themselves. Note
the correct position of the prop adapters: black spinners for front left / rear right and silver
spinners for front right / rear left. The kit includes 2x pusher propellers (marked 'R') and 2x normal
propellers (unmarked). The props labeled 'R' should be attached to the motors marked clockwise
(Front Left / Back Right) and the 'normal' propellers to the motors marked counterclockwise.
Congratulations, that concludes the build of your G-Force FPV racing drone.
Please read in full the operate guide, safety notes and information before use.