ASTRO-MED Dash 10 Manuel de démarrage rapide - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} ASTRO-MED Dash 10. ASTRO-MED Dash 10 14 pages.
Imprimer la page
III. Data Review and Playback
ACTION
Enter Data Capture Playback
Setup Playback
Enable printing of record info
Show where the trigger point is
Play back all of the capture
Compress the playback
Select chart format for playback
Play back data to paper and display
Play out data capture
Zoom in on the trigger point
Expand the playback
Play out data capture
Throughout the setup of the Dash 10, you can consult the manual for additional help . This Quick Start Guide provides the basic
information for operating the Dash 10. Under many of the menus, you will find additional choices for more advanced capabilities of
the Dash 10, and the Operations Manual provides information on utilizing these features.
Should you require additional assistance, you can contact our Technical Support Department toll -free at 800 -343-4039 or
by e-mail:
Data capture records can be reviewed on the display as well as on the chart paper.
During review, the timebase can be expanded or compressed to give appropriate detail
of the signal.
HOW TO
[MODE] [DATA PLAYBACK]
[SETUP PLAYBACK]
Toggle [REPORT] key to on. This will print out the header information.
Toggle [TrigMark] key to on. This will highlight the trigger point with a
line across the chart.
[MODIFY WINDOW ] Press the [100%] key.
[EXIT]
[SET MAGNIF]
Turn encoder wheel so that expansion is X 1/8.
[SET FORMAT]
Be sure output format is Chart 1.
[SET DEVICE ]
Turn encoder wheel so output device reads "display & chart".
[EXIT]
[RUN PLAYBACK]
[SETUP PLAYBACK] [MODIFY WINDOW ]
With [UNITS] set to percentage, press the [START] key and turn encoder wheel to 8%.
Press the [END] key and turn encoder wheel to 12%.
[EXIT]
[SET MAGNIF]
Turn encoder wheel so that expansion is X 2.
[EXIT]
[EXIT]
[RUN PLAYBACK]
... this completes the exercise.
13