Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Canon 540EZ - Speedlite - Hot-shoe clip-on Flash. Canon 540EZ - Speedlite - Hot-shoe clip-on Flash 36 pages. Camera flash
Également pour Canon 540EZ - Speedlite - Hot-shoe clip-on Flash : Manuel d'instruction (32 pages), Catalogue des pièces (12 pages), Manuel d'instruction (37 pages), Manuel de l'opérateur (4 pages), Manuel d'instruction (32 pages)
Imprimer la page
2. Using an External Power Supply
The following external power supplies are available for the 540EZ. For
details on use, read the instructions provided with the power supply.
(1) Compact Battery Pack E
• This external battery pack uses six AA-size alkaline-manganese (LR6/AM-3)
or Ni-Cd batteries.
(2) Transistor Pack E
• This external battery pack uses the Canon Battery Magazine TP, which
holds six C-size alkaline-manganese batteries (LR14/AM-2).
• The Ni-Cd Pack TP can also be used.
n recommends that AA-size lithium batteries not be used in this product
its initial high voltage may cause damage to the product,
n recommends the use of Canon-dedicated power packs. Using a non-
n power pack may cause damage to SPEEDLITE 540EZ.
6
3. Mounting the Flash
"j
Turn the lock nut several
times in the direction of the
arrow to loosen.
2 Slide the flash unit's mounting
foot fully into the camera's
accessory shoe until it stops.
3 Turn the lock nut in the oppo¬
site direction to secure the
flash firmly to the accessory
shoe. (The lock pin protrudes
from the bottom of the foot to
lock the flash in place.)
• To remove the flash, loosen the
lock nut by turning it all the way
until it stops, then slide the
mounting foot out of the acces¬
sory shoe.
Even though lock pin holes are not provided on the EOS
650,
EOS
620,
EOS
750
or EOS 850, the 540EZ can be mounted without any problem.