Canon CN20x50 Series Manuel d'utilisation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Canon CN20x50 Series. Canon CN20x50 Series 33 pages. Information display
Également pour Canon CN20x50 Series : Manuel de démarrage rapide (14 pages), Manuel d'utilisation (41 pages)
Imprimer la page
2. How to operate the speed preset function
When the "Sped" switch is pressed, the zoom starts to move at the preset speed and to the determined
direction (toward telephoto angle or widest angle) stored in section 1 and stops at the zoom end.
3. How to cancel movement in Speed Preset
Movement in Speed Preset can be canceled by any of the following operations.
1） Press the "Sped" switch again. → Zooming stops.
2） Perform zoom operation with the zoom rocker seasaw / "Shtl" switch / "Fr1P", "Fr2P", "Fr1F" or "Fr2F"
switch.
5-1-7. Framing Preset
There are three framing preset types based on how the settings are combined.
［Zoom］
This enables a predetermined picture angle and movement speed (zoom speed) to be reproduced easily.
［Focus］
This enables a predetermined focus to be reproduced easily.
［Z+F］
This enables the movement speed (focus speed, zoom speed) to a predetermined focus and picture
angle to be reproduced easily.
Preset
Frame1:
Frame2:
ZSpeed:
Up to two framing presets, Frame1 and Frame2, can be stored in the memory. Only Frame1 is described
in the description given on the following pages. Frame1 is indicated as "Fr1P".
How to set the zoom speed to the framing memory position
Movement speed to the framing position is selected by assigning the "Fr1P" or "Fr1F" switch.
• "Fr1P"---------- For the preset speed setting （preset speed） (Assigned to the AUX switch at the factory.)
• "Fr1F"----------For the maximum speed setting （fast speed）
For details on how to assign the switches, refer to 5-6. SWITCH OPERATIONS.
Setting combinations
Frame preset
control
Zoom
Focus
Z+F
*1: The zoom and focus are controlled in such a way that they start and stop simultaneously.
Framing Preset [Zoom]/[Focus]/[Z+F] Setting
The following figure is shown as an example. Actual state of the switch may look different if the
function is allocated to the different switch.
1）"Fr1P" function--------Assigned to the AUX switch by factory default.
The framing preset setting is changed on the Preset screen on the
information display. The "Frame1" setting is changed to "Zoom", "Focus",
Zoom
or "Z+F".
Zoom
800
Control content
Zoom operation
The zoom moves at the preset speed.
control
Focus operation
The focus moves at the maximum speed.
control
Zoom + focus
The zoom and focus move at the preset speeds.
operation control
Movement speed setting
"Fr1P", "Fr2P"
(speed settable)
*1
E13
5 OPERATION
"Fr1F", "Fr2F"
(maximum speed)
The zoom moves at the maximum speed.
The focus moves at the maximum speed.
The zoom and focus move at the
maximum speed.