Canon EF 70-200mm f/2.8L IS II USM Manuel d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Canon EF 70-200mm f/2.8L IS II USM. Canon EF 70-200mm f/2.8L IS II USM 11 pages. Ef zoom lenses
Également pour Canon EF 70-200mm f/2.8L IS II USM : Instructions (2 pages), Instruction (17 pages), Instruction (17 pages), Catalogue des pièces (16 pages), Instruction (17 pages), Instructions (2 pages), Manuel d'instructions (21 pages), Manuel d'instructions (19 pages), Manuel d'instructions (18 pages), Manuel d'instructions (20 pages), Manuel d'instructions (20 pages)

Imprimer la page
Canon EF 70-200mm f/2.8L IS II USM Manuel d'instructions
The
ET-87 hood can keep unwanted light out of
rain, snow,
and
dust.
Attaching
To
attach
the
hood,
align
the hood's
attachment
position mark with
the red
dot on the front of
lens,
then turn
the
hood
as
shown
by
the
arrow
until the lens' red dot
is
aligned with
the hood's
stop
position
mark.
•••
Part
of the picture may be blocked
if
the
hood
• When
attaching
or
detaching
the hood,
grasp
grasp
the rim
of
the hood to
turn
it.
the
lens,
and also protects
the front of
the lens
Removing
To remove the
hood,
hold down
the
the
side
and turn the hood in
the
direction of
arrow
until
the
position
mark on
the hood aligns
with
the
red
dot.
The hood
can
be
reverse-mounted
on
for
storage.
is
not
attached properly.
the base
of
the
hood to
turn
it.
To
prevent
deformation,
6.

Image Stabilizer Settings

from
•
If
you
are
not going to
use the
button on
the
image stabilizer
function,
the
switch
to
OFF.
the
the
lens
do
not
2
Select
the
stabilizer mode.
• MODE
1: Corrects vibrations
in
all
directions.
It
is mainly
effective for
shooting
still
set
subjects.
• MODE
2:
It
compensates
for
vertical
camera
shake during
following
shots
in
a
horizontal
direction,
and
compensates
for
horizontal
camera shake
during
following shots
in
a
vertical
direction
.
3
When you
press the
shutter
button
halfway,
the Image
Stabilizer
will
start
operating.
•
Make
sure the image
in the
viewfinder
is
stable,
then
press
the shutter button
the
rest
of
the way down
to take the
picture.