Astroflame FingerKeeper Fiche technique d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Fiche technique d'installation pour {nom_de_la_catégorie} Astroflame FingerKeeper. Astroflame FingerKeeper 4 pages.

Imprimer la page

With the door in the closed

position , place the wooden marker

block (supplied) vertically against

the frame.

With a pencil held at the side of the

block on the frame side,slide the

block from the top of the door to

the bottom,ensuring that the pencil

moves in conjunction with the block

leaving a pencil mark guideline

down the frame.

Now wedge the door in the fully

open position. (For metal doors and

kick-plates pre-drill with 2.5mm drill

bit.)

Line up the edge of the Fingerkeeper

parallel to the guideline/pencil line on the

frame. Press firmly to hold in position

before finally securing with the screws

(provided) ensuring that there is a screw in

every hole of the device.

Please ensure you use the screws provided or an exact size and type of screw (3/8"no 4 size

Once fitted the device should be in position as shown in the animation below.

With the door still in the closed

position, place the wooden marker block

vertically against the door and repeat the

same process of step 1, thereby leaving a

pencil guideline on both the door and the

frame.

flange-head self tapping screws type C)

Remove one layer only of the double

sided tape from each side of the

Fingerkeeper

device.

Repeat this procedure to attach the

Fingerkeeper device to the door itself.