AKW MediCare 01905WH Instructions d'installation et d'entretien - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} AKW MediCare 01905WH. AKW MediCare 01905WH 2 pages. Plastic fluted heavy duty grab bar

Imprimer la page
Installation Instructions
Follow these guidelines when installing an AKW Heavy Duty Grab Rail:
Wall surface and supporting structure must be adequate to support load - test suitabilty of
wall and fixings before use. Solid brick, concrete block or timber reinforcement is essential.
All fixing holes (4 or 5, according to type) in all mounting brackets must be used with
3
5mm (
/
in) or No. 10 Gauge steel or stainless steel fixings.
16
Do-not over-tighten fixings. Use fixings adequate for load.
Do not use fixings with Countersunk heads.
Each fixing must be capable of withstanding 35kg pull-out force.
If you are unsure of which type of fixing to use consult a fixing manufacturer,
stating the type and construction of surface, spacing and size of fixings.
Plastic Grab Rails are recommended for all internal applications.
All AKW MediCare Grab Rails are designed and tested to meet the requirements
of BS EN 12182 and meet ADA / ABA requirements.
The above recommendations are suggested to promote optimum product life.
Rails may be installed in other locations but optimum product life may not be achieved.
AKW MediCare are unable to specify the type of fixing to be used simply due to the vast
number of possible types and conditions of surfaces to which the grab rail can be attached.
Plastic Grab Rail Product Specification / Data Sheet
This product is designed for a single location installation.
Maximum weight capacities* :
Plastic Fluted 1900 series HD
Standard operating
temperature range :
Materials of Construction:
Brackets:
Bracket covers:
Rails:
5 4 3 2 1
X X X
X
X
190kg / 419lb or 30 stone
*Applied for less than 30 minutes in any 60 minute period.
Weight Capacity refers to the grab bar only. Fixings and retention
in the mounting surface are the responsibility of the installer.
+5°C to +35°C.
PVC-U
PVC-U
PVC-U, Inserts of Aluminium
Some rail brackets include stainless steel fixings
User Care Instructions
AKW plastic grab rails are designed for general domestic use as an aid to the movement
of a person about a normal dwelling place.
They are intended to be used to provide gripping or handle positions around doorways,
stairwells, showers, baths and other similar applications.
The grab rail must only be used for the tasks it is intended to perform.
D D o o n n o o t t u u s s e e it to tie objects or hang items from it or secure items to it.
This may have serious detrimental effects on its performance and safety.
Grab rails should be checked as part of a planned maintenance programme,
and any rails showing evidence of damage or misuse must be replaced.
Keeping your AKW Grab Rail clean
This product should be cleaned periodically using normal domestic bathroom cleaning
materials.
After cleaning always rinse with water then wipe thoroughly with a damp cloth to
remove any cleaning material residues before drying off.
D D o o n n o o t t u u s s e e strong or concentrated acidic, alkaline or other cleaning materials as these
may discolour or otherwise damage the product.
AKW do not approve or recommend autoclave cleaning due to the damage this can
cause to the special engineering plastics used in the construction of this product.
Disinfecting
Where disinfecting is necessary, standard procedures for disinfecting equipment should
be used with due care and attention taken of the warnings concerning possible effects
of aggressive chemicals on plastics.
Packaging
This grab rail is supplied in a polypropylene (PP) bag to keep the product unsoiled until
installation; it may also be bulk-packed in a cardboard box.
Both are suitable for recycling operations and should be disposed of in accordance with
local recycling regulations.