AIR HANDLE AHR Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AIR HANDLE AHR. AIR HANDLE AHR 14 pages. Excluding gripper
Imprimer la page
_________________________________________________________________________________________________
INSPECTION
The equipment does not need an assembly inspection according to regulations. We still recommend that the
equipment is inspected by an accredited company. This is to ensure that the final installation is done correctly and the
equipment is safe to use. If you do not know how to get in contact with such company we can help to convey this
contact.
FUNCTION/FEATURE DESCRIPTION
The equipment is a helping tool to lift and/or transport loads, from approx. 5kg up to the maximum capacity stated for
that particular equipment, in a way that do not harm the human body. To move the load up or down you use the hoists
handle, moving the handle up or down creates a signal to the hoists control system and it will raise or lower the load
accordingly to the signal – only a force of a few hundred grams are needed to drive maximum loads. The force placed
on the handle is proportional to the speed of the hoist.
The hoist can be balanced, this is when you release the handle and the signal becomes zero (neutral) the load can be
maneuvered by taken hold of the load itself and when pulled up or pushed down the hoist will help raise/lower the
load as if you was controlling it by the handle. This operation is slower than when operating by handle but is good when
the load needs to fit into tight places, you can easy use both hands to steer the load in position both sideways as
up/down.
SAFETY RULES
GENERAL SAFETY RULES
Gentle handling, regular maintenance and cleaning reduce maintenance costs and the risk for downtime, and make the
work both enjoyable and safer.
Air Handle´s products may only be operated by authorized and instructed personnel.
Remember that you as a user is responsible for no one to get hurt!
Only use the equipment to what it is intended to.
•
The hoist is NOT for lifting persons.
•
No one should walk/be under suspended loads.
•
Use the equipment calmly, carefully and with attention.
•
Do not overload the equipment.
•
Work Environment Authority shall be followed.
•
Inspections, service and repairs should be performed by qualified personnel. A custom modification deprives
•
the manufacturer responsibility for any injury or accident.
Check that the equipment is in good condition in the beginning of each shift.
•
Report to management if you detect any defects do not use the equipment until it is fully functional again.
•
The operator must keep full attention on the equipment all times a load is handled.
•
_________________________________________________________________________________________________
Air Handle e-p AB
Telephone
Cedersdalsvägen 6 D
186 40 VALLENTUNA
Sweden
+46 (0)8-511 873 02
Fax
E-mail
+46 (0)8-511 873 04
User manual - Side 7 of 14
AHR excluding gripper
User manual AHR V1.0.docx
Website
http://www.air-handle.se