Coldair GCV440 Manuel d'utilisation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Coldair GCV440. Coldair GCV440 20 pages. 2300w convector heater with wifi
Imprimer la page
WARNING:
Heater must not be used without the feet fitted.
This appliance has been supplied with '1 way screws' for permanent installation of the feet.
This is a safety requirement for the New Zealand and Australian market.
ASSEMBLY
Before using the heater, the feet (supplied sepa ra tel y i n the ca rton), must be fitted to the unit. The
s crew pa ck to a ttach the feet to your hea ter will be taped to ei ther one of the feet for your hea ter, or
ta ped to the plug.
Ca refully turn the Main Body upside-down on a scratch-free and
s ta ble s urface. Be ca reful to prevent damage to the cosmetic finish
or your fl oor s urfacing.
Before the appliance ca n be used, the feet must be s crewed on as
fol l ows:
1.
Unpa ck the a ppliance from the packaging.
2.
Remove the transport packaging.
3.
Check tha t the appliance s hows no signs of damage.
4.
Sl i de the feet from the outside i nto the corresponding supports
on the underside of the heater.
5.
Secure the feet firmly using the screws supplied.
WARNING:
Operate the heater in the normal upright position only with the feet
attached to the bottom. Any other position could create a hazardous situation.
Components