Coldair PLATINUM Multi Season Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Coldair PLATINUM Multi Season. Coldair PLATINUM Multi Season 12 pages. 107cm multi season heating & cooling tower fan heater

Imprimer la page

Always choose a safe location for the fan, keeping in mind the safety precautions

outlined. Ensure all packaging has been removed from the unit before use. This appliance

requires no installation, it should be used solely as a portable appliance.

WARNING:

In order to avoid overheating or fire, do not cover the heater.

WARNING:

Keep all objects at least 1 metre from the front, sides and

rear of the appliance.

WARNING:

Do not use this heater with a programmer, separate timer,

remote-control system or any other device that switches the heater on

automatically, since a fire risk exists if the heater is covered or positioned

incorrectly.

WARNING:

Never leave this heater unattended when in use.

Ensure heater is on a flat, stable, heat-resistant surface.

Once the heater is in a safe operating position and all switches are in the off

position, insert the power plug into the mains outlet and switch on.

CAUTION:

Ensure the power cord is not tight because if pulled it may

partially pull the plug from the socket. A partially inserted plug will overheat

the plug and socket and could result in fire.

When the unit is initially plugged in, there will be a "beep" and the power light will

come on indicating that there is power to the unit.

The power light will remain lit until the unit is unplugged from the electrical outlet.

HEATER

Turn the heater ON by pressing the Heater Power Button

Upon turning the Heater on, the unit will be in High Heat (H3). (Figure 3).

Press the Heat Mode Button

Press again for Low Heat (H1).

Press a third time for Heater Fan Mode (HF). This activates High Heat (H3) and Super

Low Speed (F1) simultaneously.

Press a fourth time to return to High Heat (H3).

To turn the Heater OFF, press the Heater Power Button.

Operating your Appliance

for Medium Heat (H2).