Dacs HeadLite 3+ Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dacs HeadLite 3+. Dacs HeadLite 3+ 5 pages. Four channel headphone amplifier
Imprimer la page
Instructions for use and installation
Welcome
At DACS we are very pleased that you have chosen to purchase one of our prod-
ucts. Fully assembled and tested in the UK, this HeadLite 3+ will give you years of
exemplary service. We're so confident in the quality of our products that our stand-
ard warranty is double the statutory one year, and by registering, you can extend it
for another year. Please visit our web site for details—www.dacs-audio.com.
If you have any suggestions or comments about this product please call or e-mail
us with your thoughts.
Thank you.
Introduction
HeadLite 3+ is a four input, four output headphone amplifier, with a six position
source selector switch for each amplifier. It is designed to be as flexible as possible
without introducing needless complexities.
THAT
InGenius®
balanced inputs ensure very low distortion, transformer like rejec-
tion of interference, and very good frequency response. The input connectors are
three pole 'TRS' jack sockets; they will also accept unbalanced signals on 2 pole
jacks.
Its standard outputs can drive virtually any headphones; with the +Power module
fitted to Channel 1 even the most demanding low impedance high power head-
phones are driven cleanly. The outputs are also designed to drive down long lines
to cubicles with no loss of quality. The unit is compatible with -10dBV and +4dBu
inputs (see -
"10 Sensitivity
Switches"). The +Power module, as well as driving
power hungry headphones, will drive multiple headphones - we have used up to 6
pairs of 400 Ohm headphones and experienced no level drop. Additional +Power
modules can be fitted to other channels at the time of order or retrofitted any time
after purchase. Please speak to your retailer or direct to us for details.
DACS LTD, Stonehills, Shields Road, PELAW, Gateshead, Tyne and Wear NE10 0HW, UK
Tel: +44 (0) 191 4382500
www.dacs-audio.com