Cole Hersee 75920 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cole Hersee 75920. Cole Hersee 75920 2 pages. Master disconnect switch
Également pour Cole Hersee 75920 : Installation (2 pages)
Imprimer la page
11. SEE PHOTO
Place the terminal(s) (attached to an appropriately sized
wire) directly on the base of the stud, as this will assure
the best contact and the least amount of voltage drop
across the connection.
12. Place lock washer over terminal and tighten down nut to
a torque of 70-90 in-lbs.
Normal Operation Summary
ON:
Rotate the knob 90º clockwise
until the indicator is at the 3
o'clock position, and the circuit
will be engaged
ON
OFF:
Rotate the knob
90ºcounterclockwise until the indi-
cator is at the 12 o'clock position,
and the circuit will be
OFF
disengaged
Contents of 67191
Hardware Kit
1
Knob Assembly
1
Knob Hole Plug
1
Bezel
1
4-40x0.75 Pan Head Screw
1
3/4" Lock Washer
2
3/4"-16 Hex Nuts
BEZEL, Black Plastic,
White Lettering (in kit)
CAP & SCREW, (in kit)
KNOB ASSY.,
Ø2.72 [Ø69.1]
0.450 [11.43]
1-800-548-1191 - http://www.partdeal.com - [email protected]
General Specifications
Environmental:
Electrical:
Current Ratings
Intermittent
Panel Thickness Range:
Dimensions:
Submit technical questions to: [email protected]
Consult the factory if you need further assistance
617-268-2100
.
8:00am to 4:30pm Eastern Time
Pin 4 - Ignition
Override
www.colehersee.com
Pin 3 - LED/Alarm
(Warning)
Integral Lockout Feature!
Place a padlock or other lockout device
through both holes (the bezel and the
knob) and lock it. We recommend using
a locking device with a 5/16" or 7mm
shackle.
LOCKWASHER, (in kit)
HEX NUT,
Brass (in kit)
(in kit)
2.34 [59.5]
5.38 [136.7]
40ºC to 85ºC.
Sealed to IP67 per IEC 529
Ignition-proof to ISO 8846
Meets or exceeds UL 1107
12V 300A continuous
24V 250A continuous
36V 200A continuous
1000A 90 secs On 5 minutes Off
1500A 60 secs On 5 minutes Off
2000A 30 secs On 5 minutes Off
3000A 15 secs On 5 minutes Off
0.032-0.450" (0.81-11.43 mm)
See below
CONNECTOR TO ACCEPT
DEUTSCH DT06-4S CONNECTOR
HOUSING, Black Plastic
LOCK WASHER
HEX NUT, Brass
STUD, Tin Plated Copper, 3/8-24
Ø2.75 [Ø69.8]
2.56 [65.0]
Pin 1 - Ground
Pin 2 - Manual
Over Ride
1.38 [34.9]
IF-165
Rev B