Canon MLT (S) Manuel de l'utilisateur - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Canon MLT (S). Canon MLT (S) 28 pages. Cxdi image processing software

Imprimer la page

2.2 Setting Enhancement

NOTE:

Enable enhancement

Each time [ENHANCEMENT] is touched, the setting switches between the highlight

(white outline characters against a colored background) and normal display. Edge

enhancement is enabled when in the highlighted state.

Screen Appearance when Enhancement is Enabled

Set the EDGE ENHANCEMENT parameter

Touch the

button, and set the degree of edge enhancement within the range

between 0 to 20.

The value on the left is the setting saved previously, and the value on the right is the

modified value.

This setting value determines the degree of edge enhancement. Larger values result in

more enhancement, and smaller values result in less enhancement.

Set the EDGE FREQ. parameter

Touch the

button, and set the edge frequency within the range between 1 to 7.

The value on the left is the setting saved previously, and the value on the right is the

modified value.

This setting value determines the frequency range for edge enhancement. Smaller values

enhance ranges containing low frequencies over high frequencies. Large values, on the

other hand, enhance high frequencies only.

Set the CONTRAST BOOST parameter

Touch the

button, and set the contrast boost within the range between 0 to 20.

The value on the left is the setting saved previously, and the value on the right is the

modified value.

This setting value is the degree of enhancement of the local contrast. Large values provide

more enhancement of the local contrast, and smaller values provide less enhancement.

If the EDGE ENHANCEMENT and CONTRAST BOOST parameters under

the ENHANCEMENT are set to excessive values, artifacts may occur in the

image, or the effective data of the exposure image may be damaged. Check

the exposure image, and if the enhancement is too strong, either set the

EDGE ENHANCEMENT and CONTRAST BOOST to smaller values or

disable the enhancement.

– 7 –

2.Edit Exposure Mode Settings